psgraphics

255 mm dia highly polished chromed lamination roller. 0
3 kw electric / oil heating system with PID digital controlled upto 120 C for thermal lamination.
Automatic hydraulical pressure, 5~60 bar to high quality thermal lamination finishing and manual pressure for below 90 gsm paper for plain lamination.
Duplex unwind station laterally micro adjustable up to 100 mm.
Water base lamination coating station SS 304 gum tray with worm wheel, U/D system.
Heavy duty rewinding station with felt clutch mounted on ball bearing.
Aluminum feed table (special anodized finish) with feeding gauge.
Manual feeding with 8 nos. belt with advance belt adjustment system film sleeting device & perforation device on main unwind station.
Standard Size 24”, 32”, 36”, 42”, 48”.

AC Motor (Kirloskar make) with speed reduction gear box variable speed drive electric control panel with AC drive controller with exhaust fan.
Hydrualic power pack with regulator, pressure guage (Electrically operated.)
Stock range 70~450 gsm paper or board.
Line speed 0~50 mtrs/min for water based & 0~25 mtrs/min for thermal lamination.

Reel to reel attachment and length counter.
Online sheet separator unit for thermal lamination only, which is suitable for BOPP & PVC film.